Can your resins be used to create RTV silicone molds?

Our Spot-HT resin has been tested to work for silicone molds. The silicones that have been tested successfully are Tin-cure RTV silicones, such as  Silpak R1348, or Smooth-on Tin-Cure Silicone Rubber.  You can cure the silicone around the print without the need of a coating. On the other hand, Platinum-cure resins are much more sensitive […]

How to clean the printed objects? What liquids and solvents to use?

The most used method for cleaning the objects immediately after printing is to plunge or spray them with a 50/50% mix of water and Ethanol, Isopropyl Alcohol or TPM (Tripropylene Glycol Methyl Ether). We discourage from using Methanol as it is toxic. After cleaning the object with the above mix, you can rinse the object, […]

Don’t you ship to my country?

We have encountered some difficulties for shipping to certain countries, regarding import taxes and regulations. Due to this and frequent requests of inclusion of certain destinations, we created this section to inform on Shipping Conditions and territories who have been tricky to give service to. If you don’t see your country in the shipping select […]

What are the appropiate exposure settings to use in the B9 Creator printer?

It has been brought to our attention that the exposure times we recommended here previously were too long for some B9 printers, causing the attachment of the layers to the PDMS non-stick surface. We have confirmed this through tests by users that were reporting this problem and have now altered the formulation slightly to accommodate […]

Do your resins need to be post-cured?

Sometimes, if your exposure time is chosen to be short or your color concentration is relatively high you will need to post-cure the finished object. You can do this quite easily and effectively exposing it to the sunlight or to fluorescent light. Tungsten Halogen works as well, but the best results are achieved if the […]

What color concentration do you recommend for your photoactive resins?

Our resins can be mixed with dyes and pigments at varying concentrations. For functional purposes, as controlling cure depth, concentrations between 0.25 and 2% by weight have been used. This is: 100g resin contain between 0.25 and 2 g dye or pigment. Our new hiperdispersed pigments (Red, Yellow, Black) are much more concentrated and need […]

Where are you located?

We are located near Barcelona, Spain, mainland Europe.

This site is protected by Comment SPAM Wiper.