Follow this simple selection guide to find the resins that will be compatible with your printer:
These are the most versatile range of products. They will suit lower power light sources as well as large build area setups as well as many Laser curing devices. Good starting point if you want to keep your options open.
Use these specifically tuned resins formulated to be less aggressive on PDMS Silicone non-stick films in combination with high power DLP projectors (typically 2500 to 3500 ANSI Lumen). The standard, pre-mixed color for these resins is a warm yellow, opaque pigment.The cure times are still very fast and will allow for quick build times.
A whole new line of high quality resins to be used with the Litho printer from illuminaid. These resins will be tuned to be used on the Litho off-the-shelve. A high quality and easy to use printer developped by a company dedicated to R&D and 3D printing services.
Chose this if you are using the B9 Creator or a printer with similar properties. DLP projector with 3000 ANSI Lumen, color wheel still in place, PDMS Silicone separation layer. The standard, pre-mixed color for these resins is a warm yellow, opaque pigment.
Resins compatible with the Form1 and similar SLA printers using a 405nm Laser with powers above 80mW, PDMS or Teflon separation films. The standard, pre-mixed color for these resins is a warm yellow, opaque pigment.
If you need a replacement for Envisiontec or 3DSystems SLA250 resins and are looking to try our products, you can start here. We are continuously developing and tuning our products to meet the demands of our customers.
A well designed and crafty machine that is also now taking advantage of some of our resin offerings.