DLP projector fabricators measure the optical output in different ways and this value is not to be taken as an exact figure. In general terms, the higher the Lumen output of the projector, the faster it will cure the resin. Common values range from 2000 to 3500 ANSI Lumen. This is related to the wattage […]
Yes, all our resins work very well with UVA and UVB light sources. Specific wavelengths are available in our technical docs.
Yes, our resins have been tested to work with a range of Lasers and LEDs, up to 405nm wavelength. We also have an alternate test photoinitiator at 450nm on demand.
Yes they do! If your intention is to use our resins with standard, non-modified DLP projectors, you can use our high or medium reactivity ranges, depending on your optical power output, as they have been tested in such setups. By non-modified DLPs we mean that they still house all their UV and IR filters as […]
Our standard resins use a mix of photoinitiators that work under UVB, UVA and visible blue light up until 425nm. It has been tested to work with unmodified DLP projectors, with the all filters and color wheel in place. It also works with 405nm Laser diodes and LEDs. A secondary photoinitiator mix is testable by […]